 - PROCESS Calibrator
The  - Pro is ideal for testing, installing and calibration of most process control systems, especially PLC based systems. It's main function is as a precision calibrator and measuring device of Voltage, Current and Frequency.
TheTREND feature is very useful for graphing profiles. This important feature can be used for recording, fault finding or optimizing control settings.
Extremely versatile, this unit can measure, source, and simultaneously measure and source, V, mA, mV (analog signals) along with frequency, pulses and counts (digital signals).
It also tests for continuity.
 
Features of the - Process Calibrator
- Measure, source or simulate 0 to 24 mA
- Measure 0 to 32 Vdc and Source 0 to 12 Vdc
- Measure and source -10 to 100 mV
- Continuity test function
- Measure and source frequency from 0 to 20kHz
- Measure and source counts up to 8 digits (99 999 999)
- Increment, step, auto step or ramp with built-in 24V power supply for mA loops
- Displays values in mA and % or % and mA
- Simultaneously measure and source all mA, mV and V combinations (not isolated)
- This unit covers most requirements of PLC and SCADA applications.
- Carry case, protective rubber boot, rechargeable battery, charger and test leads supplied as standard
- 2 year guarantee against faulty material or workmanship (batteries not included)
Technical Specifications of the - Process Calibrator
| Analogue Input Ranges |
Impedance |
Accuracy |
Resolution |
| 0 to 24 mA |
Input Impedance ± 17 Ώ, 250mA Fused |
0.01% FS ± 1 digit |
1µA |
| 0 to 32 V |
Input Impedance ±110 kΏ |
0.005% FS ± 1 digit |
1mV |
| -10 to 100 mV |
Input Impedance >1 MΏ |
0.005% FS ± 1 digit |
1µV |
| 0.00 to 100.00 Hz, trigger level up to 12.0 V |
Input Impedance 110 kΏ |
0.01% FS ± 1 digit |
0.01Hz |
| Pulses / min max = 6000.00 and Pulses / hour max = 360 000.00 |
| 0 to 20 000 Hz, trigger level up to 12.0 V |
Input Impedance 110 kΏ |
0.01% FS ± 1 digit |
1Hz |
| Pulses / Min max = 1 200 000 and Pulses / Hour max = 72 000 000 |
| 0 to 99 999 999 counts, trigger level up to 12.0 V in 0.1 V steps |
| Continuity with a <100 Ώ trigger using 1 V @ 1 mA. Gives visual and audible confirmation. |
| |
|
|
|
| Analogue Output Ranges |
Maximum Load |
Accuracy |
Resolution |
| 0 to 24 mA |
Output load max 500 Ώ |
0.01% FS ± 1 digit |
1µA |
| 0 to 12 V |
Output load min 500 Ώ |
0.01% FS ± 1 digit |
1mV |
| -10 to 100 mV |
Output load min 100 Ώ |
0.01% FS ± 1 digit |
1µV |
| 0.50 to 100.00 Hz, trigger level up to 12.0 V |
|
0.01% FS ± 1 digit |
0.01Hz |
| 1 to 20 000 Hz, trigger level up to 12.0 V |
|
0.01% FS ± 1 digit |
1Hz |
| 0 to 99 999 pulses, Baud rate up to 100, Amplitude up to 12.0 V |
|
|
|
 Download Calog Process Calibrator Datasheet
|
